Describe:
1,The Front And Rear Of Each Roll Are Empty For 16PCS, And The Tail Is Sealed With Masking Tape;
2,After Placing The Product On A Full Plate, Roll Up A Protective Tape And Use Masking Tape
Seal It And Affix A 1Pcs Material Label;
3. A Stack Of 8000 Pcs Per 10 Reels Is Placed In An Outer Box;
4. Handle With Care During Handling;
5. During Transportation, It Is Not Allowed To Stack Too Much (1.8M Maximum), And It Is Not Allowed To Press Heavily;
6. Drop Test Conditions:
The Finished Box Falls Freely From A Height Of 1.2 Meters (One Corner, Three Edges, And Six Sides):
A.The Product Cannot Run Out Of The Lower Belt Groove;
B.The Product Must Not Be Injured Or Deformed;
C.The Inner Packaging Material Shall Not Be Seriously Damaged
|
_0.jpg)
_0.jpg)
_0.jpg)
